EXPRESSION OF INTEREST;
Supply of Pin Brazing Consumables;
Reference: ACAN-EOI-16
BIDS Category : 7615
Closing Date: 31 July 1998
Use this reference on all correspondence: ACAN/EOI-16
Issue Date: July 15, 1998
The Sable Offshore Energy Project (SOEP) through its Alliance Partner
Allseas Canada Limited (ACAN) is requesting expressions of interest from
companies capable of supplying pin brazing materials described below.
Companies interested in pre-qualifying to bid on these work packages
should submit their corporate resumes, indicating amongst others
expertise, QA and HS&E management system description, and relevant
experience, prior to the closing date indicated above. SOEP and ACAN
reserve the right to make the final determination of which firms will
qualify to bid on the project.
SCOPE OF SERVICES
During the offshore installation of the 18 and 12 inch inter-field
pipelines by the pipelay vessel, pin brazing consumables will be
required for the installation of galvanic protection for the 3 inch
piggy-back line. The 3 inch piggy-back line is a steel pipeline which
is installed next to, and at the same time as, the 18 and 12 inch
inter-field lines. This 3 inch line is used to transport mono-ethylene
glycol to the well head.
Anodes will be used to provide galvanic protection for inter-field
pipeline and associated piggy-back lines. These anodes are presently
being installed on the inter-field gas lines, equipped with a cathode
lead which will be attached to the 3 inch piggy-back line. Wire leads
will be connected to piggy back lines during pipelay operations at sea.
Pin brazing consumables as listed below will be required for connection
of these wire leads to the 3 inch lines. Lugs for pin bracing will not
be required, as they will be preattached to the anode wire leads.
These materials will be transported offshore by Supply vessels from one
or more harbours along the east coast of Nova Scotia to the Offshore
location. The company that is awarded this work will also have to
provide transportation and offloading of this material to the dedicated
supply base.
DESCRIPTION:
The work will include the supply and delivery of the following materials
and approximated quantities:
1/ Supply of two pin brazing guns, complete will all necessary
equipment for continuous
operation in an offshore vessel environment. Power for operation
of these units will be
provided for on the vessel.
2/ Approximately 1300 Brazing Pins
3/ Approximately 1300 Ceramic ferrules
The preliminary schedule for the various activities is based on the
following dates:
- Supply of pin brazing consumables: December 1998
All inquiries and expressions of interest should be directed to:
Sable Offshore Energy Project
1660 Hollis Street, Suite 500
Halifax, NS. B3J 1V7
Attention: Sandra Johnston/J. Gillis
Fax: (902) 496-0976
IN ADDITION
POTENTIAL SUPPLIERS TO SOEP, IF THEY HAVE NOT ALREADY DONE SO, MUST
REGISTER THEIR COMPANIES INTO THE PROJECT'S DATA BASE BY CONTACTING BIDS
AT:
